“Remove 9000” Room Temperature Powder Coat Remover

T E C H N I C A L D A T A S H E E T

Description:

Remove 9000-Liquid, Room Temperature Powder Coat Remover is a Non-
Hazardous, Ready-to-Use Powder Stripper that Dissolves Powder
Coatings, Epoxy, Autodeposition Coatings, Varnishes & Adhesives.
Operator Friendly, Non-Caustic, Non- Acid, Low-Odor Formula.

Directions:

Remove 9000 Dissolves Powder Coat in 15 minutes to 1-2 hours at
Room Temperature, used in an immersion tank, drum or pail. It’s Aluminum
& All Metal Safe. Formulated to Clean Powder Coating from Hooks,
Racks and Coating Rework at Room Temperature . Strip time will vary
depending on type of coating and coating film build. Mechanical
Agitation is not required, however will accelerate stripping. Air agitation
is not recommended: Air-(Oxygen will reduce solution life). Use No-
Water with Remove 9000. Rinse parts with water after stripping.
Order a 1-gallon sample, 5-gallon pail or 55-gallon drum each at $39.99/gallon, plus-shipping, to test at your facility.
https://www.mileschemicalsolutions.com/Secure_Order_Form.htm

Begin to reclaim coating rework and clean hooks in-plant today and save!

Remove 9001-Gel Powder Coat Remover

T E C H N I C A L D A T A S H E E T

Description:

Remove 9001-Gel is a Brush-on, Room Temperature Powder Coat Remover, it is a
Non-Hazardous, Ready-to-Use Powder Stripper that Dissolves
Powder Coatings, Epoxy, Autodeposition Coatings, Varnishes &
Adhesives. Operator Friendly, Non-Caustic, Non- Acid, Low-Odor
Formula.

Directions:

Apply Remove 9001-Gel to parts with a natural bristle brush, lambs wool roller or use in an immersion tank, drum or pail. Remove 9001-Gel Dissolves Powder Coat in 15 minutes to 1-2 hours at Room Temperature. It’s Aluminum & All Metal Safe. Formulated to Clean Powder Coating from Hooks, Racks and Coating Rework at Room Temperature . Strip time will vary depending on type of coating and coating film build. Mechanical Agitation is not required, however will accelerate stripping. Air agitation is not recommended: Air-(Oxygen will reduce solution life). Use No-Water with Remove 9001. Rinse parts with water after stripping.

Order a 1-gallon sample, 5-gallon pail or 55-gallon drum each at $49.99/gallon, plus-shipping, to test at your facility.
https://mileschemicalsolutions.com/paint_powder_removal_order_form.htm

Begin to reclaim coating rework and clean hooks in-plant today and save!

Visit: http://www.mileschemicalsoluti…..mover.html