“Remove” Powder Coat Remover-Removes Powder Coating from Hooks, Racks & Powder Coat Rework at Room Temperature, Safe for use on All Metals. Remove is an Eco-friendly & Operator friendly, Powder Coating Remover. Available as “Our Fastest” Powder Coating Stripper-REMOVE 9000-Liquid Dissolver for (Immersion-Dip) | REMOVE #9001-Gel for (Brush-on applications).

T E C H N I C A L D A T A S H E E T “Remove” Room Temperature, Powder Coat Remover | Powder Coating Removal Solution to Remove Powder from Hooks, Racks & Powder Coat Rework.

Description: Visit site at: http://www.removepowdercoatpaint.com

Remove 9000-Liquid Powder Coating Remover/Dissolver is a Non-Methylene Chloride Formula used at Room Temperature to Dissolve Powder Coating. Remove 9000-Liquid Dissolver Quickly Dissolves Powder Coating in an Immersion Application. It is a Non-Hazardous, Ready-to-Use Powder Stripper that Dissolves All Types of Powder Coatings, including TGIC and Epoxy Powder Coating, Varnishes & Adhesives. Operator Friendly, Non-Caustic, Non- Acid and is a Nearly Odorless Powder Coat Dissolver, Low-Odor formula.

Directions:

Agitate before Using. Immerse parts to be stripped in an immersion tank, drum or pail. Remove 9000 Dissolves Powder Coat in 15 minutes to 1-2 hours at Room Temperature, It’s Aluminum & All Metal Safe. Formulated to Clean Powder Coating from Hooks, Racks and Coating Rework at Room Temperature . Strip time will vary
depending on type of coating and coating film build. Mechanical
Agitation is not required, however will accelerate stripping. Air agitation
is not recommended: Air-(Oxygen will reduce solution life). Use No-
Water with Remove 9000. Rinse parts after stripping with water. Not formulated for brush-on applications.

Available for purchase in 1-gallon Bottle, 5-gallon pail or a 55-Gallon drum.

Begin to reclaim coating rework and clean hooks in-plant today and save!

https://mileschemicalsolutions.com/paint_powder_removal_order_form.htm