#1 Paint: Powder Coating | Remover to Remove | Paint: Remove Powder Coating | Paint Removal: Powder Removal from Aluminum.

How to Remove Powder Coating: Powder Coating Removal

Eco-Powder Coating Stripper    Green Stripper   Aluminum Wheel Stripper

Remove Powder Coating & Remove Paint:Recycle Paint Finishing-Rework by Stripping Powder Coating with MILES Chemical Solutions Powder Coating Stripper Solutions, Obtain a Second Chance at First pass, (zero) 0-defect Quality. Remove Paint: Remove Powder Coat, Strip Powder Coating from hooks, racks and fixtures with our Powder Coating Removal Process.

We offer Eco friendly paint strippers & Green-Powder Coat stripping solutions to remove paint & strip powder coating. Safely remove paint and remove powder coating from aluminum, remove coatings from zinc, magnesium, brass, stainless, ferrous and plated metal substrates with our Nonhazardous Powder Coating Stripper Products. 

How to Remove Powder Coating, Powder Coating Stripper Solutions, Powder Coat Removers.                

#1-Eco Friendly & Green Powder Coating Removal Products, Powder Coating Stripping Solutions Provided by MILES Chemical Solutions to Strip Powder Coating from Paint Hooks and Reclaim / Recycle Paint Rework.

Environmentally Friendly: Green, Paint Strippers/Paint Removers for Stripping Paint and Powder Coating Removal. E-Coating Paint Removers, Aluminum Strippers, Strip Powder Coating from Galvanized: Zinc and Magnesium-Paint Stripping Products to "Remove Paint from Aluminum" and Strip Paint and Remove Powder Coat from Metal Substrates.

Powder Coating Removal: Product Technologies,  

T   E   C   H   N   I   C   A   L        D   A   T   A 

Green Paint- Stripping Solutions      

T   E   C   H   N   I   C   A   L        D   A   T   A 

DESCRIPTION: MILES #8641

MILES #8641 is an eco-friendly: green, multi-metal safe concentrated paint stripping solution formulated to (use with up to 50% water) to de-laminate cured coatings including: powder coating, e-coating and wet-applied cured coatings from aluminum, zinc, magnesium, brass, stainless steel and steel substrates.  #8641 can be used to clean racks daily and recycle paint rework.

APPLICATION:

MILES #8641 Utilize an immersion tank with lid, polypropylene-evaporation inhibitor-floats, ventilation and a mixer. Charge and maintain (replenish solution-loss) with 50% conc. #8641 and 50% water.Heat to 185F., immerse parts for 30-60 minutes or until coating is completely delaminated. Pressure-rinse parts with water and dry for reprocess. Use 5% of #8644 by tank volume, as required to maintain pH below 4.0, to maintain optimum stripping performance.

Non-HAP (No Hazardous Air Pollutants), Environmentally Friendly & Economical  Recycle Rework Powder Coating to reach zero defects coating quality. To place an order with us: Please fill out the order form and press submit at:

To Place orders go to: Order_Form

 We accept:       

MILES#8612  T   E   C   H   N   I   C   A   L        D   A   T   A

DESCRIPTION: MILES#8612     Powder Coating Removal Video

MILES#8612  ECO-POWDER STRIP-RTU is a ready to use (add no-water), eco-friendly: green, multi-metal safe paint strip solution formulated to dissolve cured coatings including: powder coating, (e-coating-only when heated) and wet-applied cured coatings from aluminum, zinc, magnesium, brass, stainless steel and steel substrates. Used in conjunction with #8635 Evaporation Inhibitor at 5% concentration.  

APPLICATION:

 MILES#8612  ECO-POWDER STRIP-RTU is a unique formula that is used as received with no water dilution, at temperatures of 165F to 185F. Immerse rework parts in an immersion strip tank with a lid, ventilation and a mixer, for 30 to 60 minutes. May be used at Room Temperature for TGIC Powder Coating Removal overnight.Utilize-polypropylene-evaporation inhibitor-floats to reduce evaporation and replenishment requirements. Rinse with warm water and reprocess through Paint. Use with MILES#8635 Evaporation Inhibitor at 5% concentration. Accelerate Powder Coating Removal with 5% adds of MILES #8605 as required to maintain pH between 11.5-12.5 

Non-HAP (No Hazardous Air Pollutants), Environmentally Friendly & Economical  Recycle Rework Powder Coating to reach zero defects coating quality. To place an order with us: Please fill out the order form and press submit at:

To Place orders go to: Order_Form

 We accept:       

MILES#8635 T   E   C   H   N   I   C   A   L        D   A   T   A 

MILES #8635 Eco-Friendly Evaporation Inhibitor  

(Used only with heated Alkaline Stripping Solutions),

for use with MILES #8608, MILES #8612, MILES #8626. 

Benefits:

• Reduce Stripping Solution Evaporation and Loss
• Significant Savings by Reducing Replenishment Requirements 
• Maintain Optimum Stripping Performance 
• Extend Strip Bath Life by up to 80% 
• Cleaner Work Area Environment
• Completely Water Soluble and Free Rinsing.

Recommended Use: Begin utilizing at any time on any caustic bath.

Use MILES #8635 at 3%-5% by strip tank volume to maintain a 1/4"inch floating blanket that seals off evaporation of costly chemicals and water, there-by reducing replenishment.

Non-HAP (No Hazardous Air Pollutants), Environmentally Friendly & Economical  Recycle Rework Powder Coating to reach zero defects coating quality. To place an order with us: Please fill out the order form and press submit at:

To Place orders go to: Order_Form

 We accept:       

MILES#8605 T   E   C   H   N   I   C   A   L        D   A   T   A 

MILES #8605 is formulated to accelerate stripping performance in MILES "alkaline" stripping solutions

(Used only with heated Alkaline Stripping Solutions),

for use with MILES #8608, MILES #8612, MILES #8626. 

Benefits:

• Reduce Stripping Time
• Significant Savings by Reducing Stripping time 
• Maintain Optimum Stripping Performance & pH range 
• Extend Strip Bath Life by up to 80% 
• Protects metal substrates from attack and oxidation
• Completely Water Soluble and Free Rinsing.

Recommended Use:

Use MILES #8605 Accelerator at 5% by strip tank volume only as required

to maintain optimum pH range (11.0-12.0) in MILES #8612 bath.

Also use MILES #8605 at 5% by strip tank volume, with other alkaline stripping solutions to temporarily inhibit oxidation and attack on all metal surfaces.

Non-HAP (No Hazardous Air Pollutants), Environmentally Friendly & Economical  Recycle Rework Powder Coating to reach zero defects coating quality. To place an order with us: Please fill out the order form and press submit at:

To Place orders go to: Order_Form

We accept:       

 MILES#8648 T   E   C   H   N   I   C   A   L        D   A   T   A 

Aluminum Wheel Stripper: Powder Coat Stripper

DESCRIPTION:

MILES#8648 AMBIENT POWDER STRIP-THIN is a paint strip solution formulated to under-cut: de-laminate and remove Powder Coating from Aluminum and Steel paint rework.  #8648 can be used to strip Aluminum Wheels and e-coat racks: e-coat paint rework when HEATED.

APPLICATION:

MILES#8648 AMBIENT POWDER STRIP-THIN Utilize a stainless steel or polypropylene immersion tank with a lid, ventilation and a mixer. Immerse powder  coated parts & hooks in MILES-#8648 at 50% concentration with water at 150F. to strip powder coated aluminum wheels and powder coat rework parts: remove powder coating in 15 to 20 minutes per 3 mils  cured powder coating.Utilize-polypropylene-evaporation inhibitor-floats to reduce evaporation and replenishment requirements, save on chemical, dollars and extend solution bath life. A pressure (1800-5000psi), water rinse is normally recommended when utilizing under-cutting: de-laminating technologies. The Benefits of under-cutting: de-laminating paint removal process solutions are many, including: easier to remove coating sludge in-sheets, resulting in longer bath life,lower operating cost, utilizing up to 50% water in the process, safer less hazardous for the operator and the environment.

 or Utilize MILES #8648, 100%- neat at ambient room temperatures  for 1-3 hours for cast aluminum and overnight for steel paint hooks. 

For (e-coat removal, utilize #8648 heated only) at 50% concentration with water at temperatures of 150F.-185F. Strip time is 10 minutes to 15 minutes.

Non-HAP (No Hazardous Air Pollutants), Environmentally Friendly & Economical  Recycle Rework Powder Coating to reach zero defects coating quality. To place an order with us: Please fill out the order form and press submit at:

To Place orders go to: Order_Form

 We accept:       

#8659 Non-Methylene Chloride Stripper, Thickened Brush-on Stripper,

Use at Room Temperature, Contains no-hazardous Methylene Chloride.

MILES#8659               T   E   C   H   N   I   C   A   L        D   A   T   A 

DESCRIPTION: #8659 Non-Methylene Chloride Stripper, Aircraft Stripper Alternative, contains no-hazardous methylene chloride.

MILES #8659 Thickened, Brush-on Gel, Room Temperature Stripper.

MILES#8659 a thickened brush-on Gel used at  Room Temperature.

Strip Paint & Remove 3-4 mils of Powder Coating in 30-60 minutes at room temperature. Strip Aluminum Wheels:  BMW, German, European and Japanese wheels require overnight application.

The softened, loose coating can be removed with a water pressure washer, abrasive blasting, spark-less scraper, disposable cloth or steel wool pads, then rinse with soap and water, dry and reprocess through paint or powder coating.  

Non-HAP (No Hazardous Air Pollutants), Environmentally Friendly & Economical  Recycle Rework Powder Coating to reach zero defects coating quality. To place an order with us: Please fill out the order form and press submit at:

To Place orders go to: Order_Form

 We accept:   

MILES#8608 T   E   C   H   N   I   C   A   L        D   A   T   A 

Our New Eco-friendly: Green technology:

MILES #8608

Benefits:

• Improve Stripping Performance
• Reduce Strip Time up to 50% 
• Improve Parts and Fixture Cleanliness
• Increase Productivity
• No Listed Hazardous Air Pollutants
• Increase Parts & Fixture Through-put
• Complete Blend of Solvency, Penetrating Agents and Stripping Accelerators
• Can be used with 50% water to Strip Clear Coat and Remove Powder Coating Safely from All Metal Substrates 

    MILES #8608 Bright Strip Concentrate. It is utilized with 50% water, that you add at your facility-(economy of use), at 185F to 200F. It is activated by 2%-5% of MILES #8605, only-as-required to maintain your stripping solution bath (pH between 11.5-12.5);

Use 5% by strip tank volume of our new and improved MILES #8635 Evaporation Inhibitor or 2-layers of polypropylene tank floats on the tank surface to inhibit evaporation, reduce replenishment requirements and extend stripping solution bath life.

Non-HAP (No Hazardous Air Pollutants), Environmentally Friendly & Economical  Recycle Rework Powder Coating to reach zero defects coating quality. To place an order with us: Please fill out the order form and press submit at:

To Place orders go to: Order_Form

 We accept:       

MILES#8649 T   E   C   H   N   I   C   A   L        D   A   T   A 

DESCRIPTION:

MILES #8649 Thickened, Brush-on, Room Temperature Stripper.

MILES#8649 a thickened brush-on product used at  room - temperature to remove clear coat and TGIC Powder in 1-3 hours, European and Japanese wheels require overnight application to strip aluminum wheels.  The loose coating can be removed with a spark-less scraper, disposable cloth or steel wool pads, and then rinse with soap and water, dry and reprocessed through the paint or powder coating.  

Non-HAP (No Hazardous Air Pollutants), Environmentally Friendly & Economical  Recycle Rework Powder Coating to reach zero defects coating quality. To place an order with us: Please fill out the order form and press submit at:

To Place orders go to: Order_Form

 We accept:       

T   E   C   H   N   I   C   A   L        D   A   T   A 

DESCRIPTION:

Green Stripping OxyStrip  

OxyStrip Eco-Friendly Paint & Varnish  Stripper/Remover 

Excellent for Wood Refinish Projects / Home and Construction Paint & Varnish Removal Applications/ Indoor and Outdoor Paint Stripping Uses / Stays Wet & Active up to 24 Hours / Easy to Use Fast Acting Gel, Clings to Vertical Surfaces / Contains No-Hazardous Methylene Chloride or Flammable Solvents, Pleasant Scent.

OxyStrip eco-friendly stripping solution, an alternative that actually works better than the current technologies offered as safe strip products. OxyStrip is a non-methylene chloride product, based on oxygen to accelerate coating removal performance. OxyStrip and is available by visiting: http://www.mileschemicalsolutions.com/Oxy_Strip_1.htm on the web. The product will remove all types of house paint and varnish from wood and metal surfaces and is non-regulated for shipping and non-hazardous, it has little to no-apparent odor, is thickened to hold to vertical surfaces and will not evaporate as fast as many other products available in today’s market place.

The use of chemical resistant gloves and safety glasses is recommended for all chemical applications, do not utilize latex rubber gloves with OxyStrip.

1-gallon of OxyStrip can cover up 100-200 square feet and is economical compared to the products sold in smaller quantity containers on the store shelf.

Non-HAP (No Hazardous Air Pollutants), Environmentally Friendly & Economical  Recycle Rework Powder Coating to reach zero defects coating quality. To place an order with us: Please fill out the order form and press submit at:

To Place orders go to: Order_Form

We accept:       

How To: Remove Paint & Strip Powder Coating 

Strip Paint: Remove Powder Coating & Recycle Paint Finishing-rework, with MILES Chemical Solutions Powder Coating Stripper, Obtain a Second Chance, at First pass (zero) 0-defect Quality. Remove e-coat, strip powder coating from hooks, racks and fixtures with our metal paint stripper. Eco friendly paint stripper & Green-powder coat stripping solutions to remove     paint & strip powder coating. Safely strip paint from aluminum: remove paint from zinc/magnesium/brass/stainless/ferrous and plated metal substrates    with our Nonhazardous, Powder Stripping Products. 

  Request: Paint Stripping Products-Technical Data 

Additional offerings: Aluminum Paint Strippers, Paint Removal Products, Paint Stripping Service/Coating Removal Service.

Contact us for your specific paint stripper/paint remover product requirements or Paint Stripping Services/Paint Removal Quote and for your  Free: Paint Stripping Products-recommendation:

How To: Strip Aluminum Alloy Wheels     

Aluminum Wheel Stripped in MILES #8648  

Aluminum Wheels can be safely, chemical stripped at low temperatures with MILES Chemical Solutions #8648. The Aluminum Wheel can be reconditioned by removing the old coating with MILES Chemical Solutions #8648 in approximately one hour and then re-coating the aluminum rims with durable powder coating.  

Process Requirements:

*  A stainless steel or polypropylene tank to immerse the aluminum wheel/s.

*  An immersion heater.

*  A tank mixer for agitation, Note: Never use air agitation, chemical oxidation will occur which decreases chemical bath life.

*  Polypropylene floating evaporation inhibitor balls

*  MILES Chemical Solutions #8648 Aluminum Stripping Solution Concentrate.

*  Water

Steps: 

1) Utilize a Polypropylene or Stainless,

heated immersion strip tank.

2) Add 50% MILES Chemical Solutions #8648 and 50% water.

3) Agitate solution with mixer or circulation pump. Note: Never agitate with direct-air! Oxidation, decreases chemical bath life.

4) Heat solution to 150F.  

5) Soak wheels for 1.5 hours, while maintaining 150 Degrees F. Note: Utilize a tank lid and polypropylene floating evaporation inhibitor balls to reduce solution loss and replenishment requirements and extend to chemical bath life.

6) Rinse the Aluminum Wheels with water and a pressure washer to remove paint: powder and excess coating from recessed areas on the aluminum wheel surface.

Benefits:  

After rinsing, the aluminum alloy wheels have a pre-paint, original bright surface appearance and are ready to return to the powder coating process.  

The de-laminated coating sludge can be easily removed from the strip tank with a 75- mesh in-line, stainless basket strainer, skimmer or screen parts basket filter.  

• MILES Chemical Solutions #8648 coating removal process is normally implemented in Paint Finishing and Powder Coating facilities, additionally at many Industrial-Coating Removal Service & Stripping Service Contractors worldwide.

 Summary:

• This is an easy to implement process in an Industrial Environment, such as in Paint, Finishing and Powder Coating Facilities and at Coating   Removal Service Providers. This aluminum wheel stripping process was not developed for individual consumer use.
• Consumers and Individuals may utilize thickened MILES#8649 room- temperature stripper to strip a single set of aluminum wheels.

 ____________________________________________________________

 For further information visit: www.aluminumwheelstripping.com

Miles New Paint Stripping Technology, Methods and Process:

Miles has recently developed Environmentally Friendly Paint Strippers, Low in VOC and Low Temperature <205F., Proprietary Technologies and Methods to salvage and recycle paint rework, avoiding the necessity of parts disposal. Miles Paint Strippers are formulated to strip paint, strip powder coatings and remove e-coating from most surfaces including: Aluminum, Brass, Copper, Zinc, Steel and Plastics.

These Proprietary Paint Stripper Products were engineered by Miles to provide the Paint, Powder Coating and E-coating Finishing Industry with Environmentally Friendly Paint Stripping Products and economically feasible methods to recycle paint rework. Miles Technologies allow the Finishing Industry to reach "0-Tolorance" Paint Quality without having to reprocess sanded and paint-repaired parts that may have broken the substrate surface.  Sanding paint defects from parts may adversely affect the pretreatment, the substrate original surface quality and may even result in final paint quality failure. History has shown evidence of  inter-coat paint adhesion failure on sanded and refinished painted parts. 

Miles Paint Stripping Processes utilize an insulated, heated immersion tank with a lid, a mixer for agitation, a filter to remove paint laden sludge and exhausted ventilation. The paint rework parts are immersed in a solution of 50% Miles chemistries and 50% water added at the Finishers facility. The 50% water and Miles Paint Stripper Products solution is heated to a range of 130F-200F, depending on the substrate, the coating type and the Miles Paint Stripping Products utilized. The process time to completely strip the cured coating from the substrate is usually 10 minutes with E-coat Removal to less than an 1-hour paint stripping powder coatings.

The second stage is a fresh water immersion rinse, usually followed by a manual or automated pressure water final rinse. The parts are then air or oven dried and reprocessed through paint with original surface quality.

Miles Chemical Solutions founder, Samuel L. Miles, was the first individual in the United States to invent, formulate and patent methods to strip paint and remove paint coatings from aluminum and galvanized substrates with a soap-based paint stripper, 99% free of VOC.

 Original Article From "Paint and Powder"  
(Vol.75, No. 9), Sept.99. 

Dan Davis - Senior Editor

      Miles has been hard at work over the past several years trying to find an environmentally friendly method for stripping paint or powder from Non-Ferrous substrates. After working unsuccessfully with conventional technologies, he recently discovered the perfect stripping material – Soap.
      To be exact, Miles Chemical Solutions (Detroit) is working with a compound that contains surfactant, high temperature synthetic soap. The material is also developed with Triethanolamine, a very hygroscopic, viscous liquid used in manufacturing surfactants and emulsions. Miles says the stripping material is 99% free of VOC's.
      Typical stripping materials for Non-Ferrous objects contain VOC's, such as N-methyl 2-pyrrolidone and Glycol Ethers. Others based on Silicates, tend to stick to Non-Ferrous substrates, making them difficult to repaint.  
      Miles says he worked extensively with solvents and silicates in attempt to find a stripping material that was both environmentally friendly and an effective stripping compound, but was unsuccessful. He even investigated high-temperature polymers, but ran into all-to-familiar problems. “The beauty of this stripping technology is that it doesn’t hurt the surface or shine of the nonferrous substrate,” he adds.
      The stripping material is best used in a vented hot-strip tank with adequate agitation. The material is poured directly into the tank with no water or solvent additive needed.
      “This material is non-hazardous and can be easily disposed of,” Miles says.
      “If operators want to recycle the stripping material, all they have to do is filter the paint-laden material, add about 50% virgin material and feed it back into the tank. That way they are eliminating pounds of waste every year.”
The Patented Technology has shown the ability to remove paint on Aluminum, Brass, Zinc, PC-Plastic parts, Ferrous and Non-Ferrous substrates.

    "Miles says that he hopes to provide Powder Coating Strippers to  Custom Powder Coaters Worldwide"  

_________________________________________________________________

Additional offerings: Aluminum Paint Strippers, Paint Removers, Powder 

Paint Removal Products, Paint Stripping Service/Coating Removal Service.

Peelable Coatings, Peelable Masking/ Maskings: Temporary Protective Coatings, Easily Applied, Eco-Friendly Liquid Compounds that Dry to form a Temporary Protective Masking that becomes a Peelable/Strippable Temporary Protective Coating. Unlimited Uses, Many Major Applications are listed here…

Contact us for your specific paint stripper/paint remover product/powder coating stripper requirements or A Free  Paint Removal & Paint Stripping Service/Coatings Removal  Quote and  for 

Paint Stripping Recommendation:  

Restore, Recycle & Reclaim Costly Paint Rework with MILES Chemical Paint Strip Solutions, Powder Coating Strippers, Remove E-coat, Paint Stripper for Stripping Aluminum Galvanized Steel non-ferrous & polypropylene and nylon plastics, Paint Stripping Products and more... 

Find Custom Coaters: Powder Coaters: Paint Finishers: Metal Finishers: Finishing Equipment: Finishing Suppliers: Finishing Events and Powder Coating Online Resources Here: